JavaScript is required to run this calculator. Your browser either does not support JavaScript, or has JavaScript turned off.
  Loading... Please wait...

Our Newsletter


TS-100 Aspirated Radiation Shield (shield only)

  • TS-100 Aspirated Radiation Shield
  • TS-100 Aspirated Radiation Shield
  • Sensor port accepts thermistors and humidity probes
  • Thermistor and Campbell Scientific CS215 adaptor
  • Thermistor and Rotronic HC2-S adaptor
  • Thermistor and Vaisala HMP110/60 adaptor
  • Standard Thermistor-only adaptor
  • An Apogee TS-100 Aspirated Shield and SP-230 All-Season pyranometer keeping watch high over North Logan, Utah. Photo courtesy of Jobie Carlisle.


Product Description

The TS-100 is the shield only model of Apogee's Fan-aspirated Radiation Shield. The unique aerodynamic shape and rugged, low-power fan make it the first research-grade fan-aspirated shield that is practical for use on batter or solar powered stations. The shield provides excellent sensor protection and accommodates various combinations of thermistors, PRTs, and humidity probes using one of the sensor port adapter plugs. Click here for a list of compatible sensors. If you use a different sensor, please contact us directly to discuss compatibility. Typical applications include air temperature and humidity measurement in weather networks, often for weather forecasting, and solar energy sites. Fan-aspirated shields are also important in the precise measurement of air temperature ad humidity gradients above the land surface and in climate change monitoring.

 

Manuals
Owner's
Manual
Specification Sheets
Specification
Sheet
Technical Information
Sample Datalogger
Programs
Technical Drawings
Technical
Drawing
Technical Information
Technical
Information

 

Ecological Research

Tasmania: Ecological Research
Eight TS-100 shields used to provide air temperature measurements to monitor long-term ecological health dynamics within wet eucalyptus forest at the Warra long-term ecological research site (LTER).
Read More >

 

TS-100 at Peter Sinks

TS-100 at Peter Sinks
TS-100 used on a weather station at a record-setting cold location-Peter Sinks, Utah.
Read More >

 

TS-100 at Utah State University

TS-100 at Utah State University
The USU weather station uses both an aspirated and static shield to monitor air temperature. A real-time graph on the site shows errors that occur when using static shields.
Read More >


Specifications

Difference among Individual Replicate Shields
Less than 0.1 C
Aspiration Rate
6 m s-1 at full speed; 3 m s-1 at half speed
Fan Input Voltage Requirement
10.8 to 13.2 V DC
Fan Current Drain
80 mA at full speed; 25 mA at half speed
Fan Dust and Water Protection
IP55
Dimensions
220 mm height; 270 mm diameter
Mass
840 g
Cables
5 m of shielded, twisted-pair wire for fan and air temperature sensors; additional cable available in multiples of 5 m; santoprene rubber; jacket (high water resistance, high UV stability, flexibility in cold conditions); pigtail lead wires
Temperature Sensor
Not included
Warranty
4 years against defects in materials and workmanship

Find Similar Products by Category


You Recently Viewed...